{
  "id": "DF-GEN-01-TP-02",
  "slug": "supported-model-rehearsal",
  "title": "Supported cover and cartridge-path rehearsal",
  "objective": "Inspect the rigid model relationships and supported path; this is not an operating instruction.",
  "steps": [
    {
      "number": 1,
      "title": "Begin with identification",
      "instruction": "Complete the configuration/component exercise and state the inert-model boundary.",
      "component_id": "HOUSING",
      "inspection_pose": 0,
      "expected": "Correct fixture and source revision are identified."
    },
    {
      "number": 2,
      "title": "Inspect access",
      "instruction": "Open the model access-door view. Check the door/fixture relationship visually.",
      "component_id": "DOOR",
      "inspection_pose": 20,
      "expected": "Door clears the represented support path."
    },
    {
      "number": 3,
      "title": "Inspect the upper pivot",
      "instruction": "Select the upper retaining assembly and observe that its pivot stays on the fixed structure.",
      "component_id": "CLIP_UPPER",
      "inspection_pose": 28,
      "expected": "The upper assembly is conserved."
    },
    {
      "number": 4,
      "title": "Inspect the lower pivot",
      "instruction": "Select the separate lower assembly; the cover remains seated until both represented states have been reviewed.",
      "component_id": "CLIP_LOWER",
      "inspection_pose": 36,
      "expected": "Two assemblies remain; housing is fixed."
    },
    {
      "number": 5,
      "title": "Inspect supported separation",
      "instruction": "Move to the axial cover-inspection pose. The support carriage follows the cover.",
      "component_id": "COVER",
      "inspection_pose": 50,
      "expected": "Cover motion is axial and continuously supported."
    },
    {
      "number": 6,
      "title": "Inspect the clear position",
      "instruction": "View the cover\u2019s supported rightward inspection position.",
      "component_id": "COVER_SUPPORT",
      "inspection_pose": 62,
      "expected": "The cartridge axis is clear before A moves."
    },
    {
      "number": 7,
      "title": "Inspect the cradle",
      "instruction": "Observe the lowered extension and subsequent raised support pose.",
      "component_id": "CRADLE",
      "inspection_pose": 82,
      "expected": "Support is in place before A is shown withdrawn."
    },
    {
      "number": 8,
      "title": "Inspect the same A",
      "instruction": "Move toward full inspection spread and follow A along the same axis.",
      "component_id": "ELEMENT_A",
      "inspection_pose": 100,
      "expected": "The original A stays rigid; B does not move into the housing."
    },
    {
      "number": 9,
      "title": "Inspect the reverse path",
      "instruction": "Return the inspection slider toward assembly: A returns before supports retract and the door closes.",
      "component_id": "ELEMENT_A",
      "inspection_pose": 0,
      "expected": "The inverse order is visible; no new cartridge appears."
    },
    {
      "number": 10,
      "title": "Close the exercise record",
      "instruction": "Record unclear geometry or evidence for a qualified reviewer. Physical fit and release need their own approved source.",
      "component_id": "HOUSING",
      "inspection_pose": 0,
      "expected": "Model inspection is not recorded as real equipment readiness."
    }
  ],
  "version": "DRAFT-1",
  "equipment_id": "DF-GEN-01",
  "configuration": "DEMO-01",
  "status": "CONCEPT TRAINING PROCEDURE DRAFT",
  "operationally_approved": false,
  "boundary": "Inert model/approved training fixture only. Not an OEM operating SOP, service release or competence certificate."
}